Call us on  031 207 1133

Home » Anti Bacterial

Anti Bacterial

Anti Bacterial has been the brain child of Prostar Paints since one of it’s directors came across an article in the local news media describing the unnecessary and sad loss of 21 new born babie’s lives at Mahatma Gandhi Memorial Hospital in Phoenix, Durban during the course of June 2005. According to that newspaper, six outbreaks had been reported in KZN earlier on during that year. According to his knowledge a common practice among many international hospitals was the use of Anti Bacterial paint. This was the stimulus that set off a journey into researching and developing their very own Anti Bacterial Paint.

COMPOSITION

Pigments Mainly Titanium Dio xide, Iron
Binder Oxide, Carbon Black, Organic
Thinner Pigments and Mineral Extender, Acrylic Emulsion
Properties: Water
Colour A wide range of colours. Please
Appearance refer to colour card.
Recommended no. of coats Low Sheen
Recommended Dry Film 2 coats
Thickness Per Coat Around 30m (Dependent on the
Drying Time substrate condition)
Touch Dry 15 minutes (dependent on
Hard Dry temperature and humidity.
Recoating Interval 30 – 60 minutes
Theoretical Coverage at 2 – 3 hours.
Recommended Dry Film 10 – 12m² per litre per coat
Thickness (Actual coverage is dependent on substrate condition.) *

 

  • APPLICATION METHODS

    1) Brush / Roller : For the 1st and 2nd coats, dilute with 10% water.
    2) Conventional Air Spray : Dilute the paint with 20% water.
    3) Airless Spray : Dilute the paint with 5% water for the 1st and 2nd coats.
    Clean Up : Clean up equipment with water immediately after use. Previously Painted Surfaces
    Remove all unstable paint film, loose chalk, dust and foreign matter. Make good any surface defects, clean off and dry. Spot prime with Prostar WALL
    SEALER.

  • RECOMMENDED USES

    For decoration and protection of interior surfaces such as walls, ceilings, plaster, brickwork, wallboards and asbestos.

  • PRODUCT DESCRIPTION

    Prostar Fresh Anti-Bacterial Emulsion is a low VOC pure acrylic based paint with non-added lead and mercury which gives a low sheen finish for interior
    walls. This anti-bacterial paint provides protection from bacteria which promotes better hygiene and health. It is an ideal paint for use in homes, schools,
    hospitals and food preparation. Prostar Fresh Anti-Bacterial Emulsion has a special formula which protects the environment from any types of bacteria
    such as MRSA, E-Coli and Staphylococcus Aureus – useful for inhibition of asthma, flu and diarrhoea.

  • FACTS ABOUT MOULD

    Moulds are microscopic fungi that live on plant and animal matter. Moulds can be found almost anywhere; they grow virtually on any substance where
    moisture is present.

  • SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION:

    Keep container tightly closed and keep out of reach of children or away from food and drink.
    Ensure good ventilation during application and drying.
    When applying paint, it is advisable to wear eye protection.
    In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
    Remove splashes from skin by using soap or water.
    Paint must always be stored in a cool place.
    When transporting paint, care must be taken. Always keep container in a secure upright position.
    Dispose off any paint waste in accordance with the appropriate Environmental Quality Regulations.

  • HOW DOES ANTI BACTERIAL DIFFER FROM ANTISEPTICS?

    While antiseptics such as alcohol are highly effective over a short period of time, Anti Bacterial protection lasts for the life of the paint and always works
    to protect against bacteria.

  • HOW SAFE IS PROSTAR FRESH ANTI BACTERIAL PAINT?

    The technology it uses stems from Buckman Laboratories which dates back to 1954 and is the most widely tested antibacterial and antifungal
    ingredients in the world and has a long history of safe use. It has been proven effective in 20,000 tests at over 27 independent laboratories around the
    world.

  • HOW DOES THE PAINT WORK?

    Anti Bacterial technology is incorporated into the paint at the manufacturing stage. It does not wash or wear off, lasts the life of the paint and forms a
    long lasting physical barrier against bacteria.
    When microbes such as bacteria, mould and mildew come in contact with the painted surface, Anti Bacterial paint protection acts to deplete the cells of
    important metal ions and disrupts their ability to generate energy, which slows their growth and ultimately causes them to die.
    Prostar’s Fresh Anti Bacterial paints effective ingredient works continuously to keep painted surfaces cleaner and safer.
    With Prostar’s Fresh Anti Bacterial paint, paintwork has extra protection against messy hands, food borne bacteria, bacterial stains and odours, and
    mould, mildew and fungus. It helps you keep the family home beautiful, cleaner and fresher.
    It’s protection is ideal for walls and ceilings in bedrooms, kitchens and bathrooms as well as damp, high humidity areas or wall surfaces, where an
    added level of protection from microbes is desired.

  • WHAT DOES IT PROTECT AGAINST?

    Prostar Fresh Anti Bacterial provides protection against bacteria such as E. coli, Salmonella, Listeria, Golden Staph and the growth of mould, mildew
    and fungus on painted surfaces such as walls and ceilings in bedrooms, kitchens and bathrooms, as well as damp areas of the home.

  • WHAT DOES RESEARCH SAY?

    Research indicates that many walls in hospitals are covered in unhealthy, disease causing bacteria.
    Unfortunately, normal hygiene practices do not usually include regular cleaning and washing of walls.
    Research confirms that many hospitals have limited knowledge about healthy hygiene practices, particularly in relation to food and patient handling.
    This increasing problem has led to the development of a growing number of innovative products such as Prostar Fresh Anti Bacterial which are
    designed to keep our hospitals healthier, cleaner and safer.

Comments are closed.